Chipboard vs MDF (Lasani) vs Plywood: where to use each
Choosing the right board matters as much as the design. Here is a simple guide to where each one works best in a kitchen, wardrobe, vanity or media wall.

What are they made of?
- Chipboard is made of small wood chips and sawdust pressed together with resin.
- MDF (Lasani) is made of very fine wood fibres pressed with resin. “Lasani” is the common local name for MDF.
- Plywood is made of thin layers of real wood glued crosswise under pressure.
Chipboard
Good: the most affordable of the three, light and easy to cut, and smooth when laminated.
Watch out: it is the weakest of the three, it swells and crumbles with moisture, and it holds screws poorly, especially if re-fitted.
Best for: dry-room wardrobes, inner shelves and budget projects.
MDF (Lasani)
Good: very smooth with no grain or knots, great for paint, gloss and laminate, and it cuts cleanly for grooves and designs.
Watch out: it is heavy, it swells if water gets in (especially at the edges), and screws grip its edges less firmly.
Best for: doors and shutters, media walls and decorative panels.
Plywood
Good: the strongest, with the best screw holding and the best moisture resistance (choose a waterproof grade). It holds up well under load.
Watch out: it costs more, the grain can show so it needs veneer or laminate, and quality varies between brands.
Best for: kitchen cabinet bodies, sink areas and vanities, and heavy shelves.

Which one, for where?
| Where | Use |
|---|---|
| Kitchen cabinet body | Plywood (waterproof grade near the sink) |
| Kitchen shutters | MDF (Lasani), smooth for gloss, paint and laminate |
| Wardrobe body | Plywood for the longest life, or MDF or chipboard for dry rooms |
| Wardrobe doors | MDF (Lasani), clean finish for modern fronts |
| Bathroom vanity | Waterproof plywood. Avoid chipboard in wet areas |
| Media wall panels | MDF (Lasani). Back heavy TV mounts with plywood |











